Fiat Panel Van 12kg underfloor Caratank kit with exhaust exit towards front wheel.
NEW FOR 2020- Technical update LPG tank mounting cradles.
Our underfloor tank mounting cradles are now fully dipped and electroplated. This ensures that the electroplating goes fully inside the cradle to give the best corrosion protection possible.
In line with current industry guidelines the underfloor LPG tank and its mountings when installed should be further treated with a suitable spray on anti-stone chip paint.
For any technical questions please feel free to contact firstname.lastname@example.org
This LPG tank setup kit is designed to be located in the centre of the vehicle just in front of the existing handbrake cable assembly.
The Caratank used is 30ltr water capacity only on the euro 4.
The tank is secured by using purpose designed tank mounting cradle, that have been designed by Autogas 2000 Leisure with collaboration with Cad designers. These British made cradles are laser cut and folded to offer a mounting for any of our 200mm diameter gas tanks under floor to the X250 chassis as used on many panel van conversions.
The design has been checked and an in-house certification is applied after confirmation from an engineering consultant to confirm that the cradle exceeds current recommendation for under floor tank mounting through mathematical calculations.
The cradles are bolted through the chassis side so offer an easy fitting on pre converted motor homes where a floor mounting would not be possible allowing the tank to lift straight in. This fixing also allows the tank to simply lifted into position during install and can in later life be simply removed for any service type of work that may be required. Rubber insulation is also used between the tank and mounting frame to further protect the tank from corrosion build up between the two surfaces.
The 30Ltr Caratank gives a 12kg working capacity and frees up the original gas locker box for other uses.
Various tank regulators are available either direct, remote or crash sensing in the event of new vans that require to use the gas heating while driving (remote mounted regulator included in this kit).
A heat shield is provided to reflect heat from the vehicle exhaust but also acts as a suitable stone guard to protect the tank during normal use.
Included the is kit is the led switched gauge, which is usually mounted on the dashboard giving a clear reading of the gas amount from inside the van.
Autogas 2000 recommend that the tank and associated fixing are further treated after install with suitable under-body stone guard spray on protection.
Choice of remote fill point are available to suit various van applications but pictures the sill filler is supplied in this kit unless we are otherwise advised. The standard 70mm round filler in black or white is available for this vehicle. If you would prefer the round filler please contact us, as a longer filler hose is required.
The kit comes complete with: –
1x 30Ltr Caratank with valves & tank box
1x Pair of purpose designed tank mounting cradle
1x Rubber strip (between tank and frame)
1x Fitting kit for Frames (chassis spaces ETC)
1x Fitting Kit Screws/Pipe Clips 8mm
1x 1.5m Filler hose
1x Led switched gauge and sender
1x Sill mounted bayonet filler
1x Heatshield/Stone guard
1x Stainless Steel Pigtail
1x STD Regulator
30ltr LPG Vapour Tank specifications: –
Measurements – 200mm x 1052mm
Tank Weight empty – 20.3kg
LPG in litres @ 80% – 24ltr
LPG in kg @ 80% – 12kg