Underfloor tank mounting cradles are now fully dipped and electroplated. This ensures that the electroplating goes fully inside the cradle to give the best corrosion protection possible.
In line with current industry guidelines the underfloor LPG tank and its mountings when installed should be further treated with a suitable spray on anti-stone chip paint.
For any technical questions please feel free to contact us.
Designed by Autogas 2000 with collaboration of Cad designers these British made cradles are laser cut and folded to offer a mounting for any of our 200mm diameter gas tanks under floor on many panel van conversions.
The design has been checked and an in house certification is applied after confirmation from an engineering consultant to confirm that the cradle exceeds current recommendation for under floor tank mounting through mathematical calculations.
These cradles are designed to be bolted through the steel floor or can be mounted to chassis side, with universal bolt hole spacing the cradles can also do both floor and chassis. once fitted the LPG tank can be lifted and clamped securely into the cradle with the rubber insulation strip.
The cradles come as a pair with rubber insulation and clamping bolt. if you require mounting bolts to floor and spreader plates please advise us as these are available separate.
Please feel free to contact us for further information or confirmation that they are suitable for your vehicle.